User Manual

92D-Link DIR-895L User Manual
Section 4 - Conguration
Wireless
Enable this option to have the DIR-895L automatically manage the
2.4 Ghz and 5 Ghz wireless networks. Disable this option if you want
to manually congure the 2.4 Ghz and 5 Ghz wireless networks.
Enable or disable the wireless frequency band.
Create a name for your wireless network using up to 32 characters.
Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Choose None, WEP, or WPA/WPA2-(Personal) (recommended).
Select the desired wireless networking standards to use. The available
options will depend on the wireless frequency band, as well as the
currently selected security mode.
Select the desired channel. The default is Auto (recommended).
Select the desired wireless transmission power.
Select Auto 20/40 if you are using both 802.11n and non-802.11n
wireless devices, or select 20 MHz if you are not using any 802.11n
wireless clients.
Smart Connect:
Status:
Wi-Fi Name
(SSID):
Password:
Security Mode:
802.11 Mode:
Wi-Fi Channel:
Transmission
Power:
Channel Width:
In the Settings menu on the bar on the top of the page, click Wireless to see the wireless conguration options. To congure the router’s guest
zone, click the Guest Zone link. Refer to page 94 for details. Click Advanced Settings... to expand the list and see all of the options. The following
options apply to both the 2.4 GHz and the 5 GHz wireless frequency bands:
DIR-895L