User Guide

4D-Link DIR-879 User Manual
Section 1 - Product Overview
Hardware Overview
Back
1 Reset Button
Press and hold the reset button with a paper clip for 10 seconds to reset the router to the factory default
settings.
2 WPS Button Press to start the WPS process. The LED will blink white.
3 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and game consoles.
4 Internet Port Connect your broadband modem to this port using an Ethernet cable.
5 Power Port Connect the supplied power adapter.
6 Power Button Press to power the router on and o.
7 Mode Switch
Select Router (left) or Extender mode (right). To change modes, move the switch to the desired
position and after ve seconds the router will reboot into the desired mode. Router is the default
mode. Firmware for this feature will be available in the future.
3 4 521 76