User Guide

48D-Link DIR-879 User Manual
Section 3 - Conguration
For the 2.4GHz band:
Select Auto 20/40 MHz if you are using both 802.11n and non-
802.11n wireless devices, or select 20 MHz if you are not using any
802.11n wireless clients.
For the 5GHz band:
Select Auto 20/40/80 MHz if you are using 802.11ac, 802.11n, and
non-802.11n wireless devices, or select Auto 20/40 MHz if you are
using both 802.11n and non-802.11n wireless devices.
The default setting is Visible. Select Invisible if you do not want to
broadcast the SSID of your wireless network.
Use the drop-down menu to select a schedule for enabling the rule.
The schedule may be set to Always Enable, or you can create your
own schedules in the Schedules section (refer to page 64).
Click Save when you are done.
Channel Width:
Visibility Status:
Schedule: