Operation Manual
90D-Link DIR-868L User Manual
Section 3 - Conguration
Advanced Wireless
This will display which radio band the following
settings will be used for. This top box will
be the settings for the 2.4 GHz band.
Set the transmit power of the antennas
for the 2.4 GHz band.
This enables 802.11d operation. 802.11d is a wireless
specication developed to allow implementation
of wireless networks in countries that cannot use
the 802.11 standard. This feature should only be
enabled if you are in a country that requires it.
WMM is QoS for your wireless network. This
will improve the quality of video and voice
applications for your wireless clients.
Enable this option to reduce interference from other
wireless networks in your area. If the channel width
is operating at 40 MHz and there is another wireless
network’s channel over-lapping and causing interference,
the router will automatically change to 20 MHz.
This will display which radio band settings will be used. This top box will be the settings for the 5 GHz band.
Set the transmit power of the antennas for the 5 GHz band.
This enables 802.11d operation. 802.11d is a wireless specication developed to allow implementation of wireless networks
in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.
Click Save Settings to save the current conguration.
Wireless Band:
Transmit Power:
WLAN Partition:
WMM Enable:
HT20/40
Coexistence:
Wireless Band:
Transmit Power:
WLAN Partition:
WMM Enable:
This page allows you to change some of the advanced wireless settings of the DIR-868L. It is recommended that you only change these settings if
you are familiar with their functions and proper settings, or are instructed to do so.