Operation Manual
80D-Link DIR-868L User Manual
Section 3 - Conguration
The protocol used by the application.
The rule applies to a ow of messages whose LAN-side IP address
falls within the range set here.
Select the application port for this rule from the drop-down
menu.
The rule applies to a ow of messages whose WAN-side IP address
falls within the range set here.
Click Save Settings to save the current conguration.
Protocol:
Local IP Range:
Application Port:
Remote IP Range:
A QoS Engine Rule identifies a specific message flow and
assigns a priority to that ow. For most applications, automatic
classication will be adequate, and specic QoS Engine Rules
will not be required.
The QoS Engine supports overlaps between rules, where more
than one rule can match for a specic message ow. If more than
one rule is found to match, the rule with the highest priority will
be used.
Create a name for the rule that is meaningful to you.
Select a desired priority level for the rule from the drop-
down menu. This priority level will be used to determine the
importance of this rule according to the priority rule selected
in the QoS Setup above.
Classication
Rules:
Name:
Queue ID: