DIR-867 AC1750 MU-MIMO Wi-Fi Router Quick Install Guide
Package Contents DIR-867 AC1750 MU-MIMO Wi-Fi Router Power Adapter Ethernet Cable Wi-Fi Configuration Card Quick Install Guide If any of the above items are missing, please contact your reseller. Minimum Requirements Network Requirements: • An Ethernet-based broadband modem Web-based Configuration Requirements • Computer, smartphone or tablet with a Web browser* * 2 We recommend using the latest available browser version for the best compatibility and performance.
Hardware Overview 1 5 2 3 6 4 7 8 9 10 11 1 Power LED A solid light indicates a proper connection to the power supply. The light will be a solid orange during boot up. 2 Internet LED A solid light indicates connection on the Internet port. If the LED is orange, the router cannot connect to the Internet. 3 Wireless (2.4 GHz) LED A solid light indicates that the 2.4 GHz wireless band is enabled. 4 Wireless (5 GHz) LED A solid light indicates that the 5 GHz wireless band is enabled.
Before you Start • Users with DSL providers - If you are using a PPPoE connection, you will need your PPPoE user name and password. If you do not have this information, contact your Internet provider. Do not proceed until you have this information. • Users with Cable providers - Make sure you unplug the power to your modem. In some cases, you may need to turn it off for up to 5 minutes. Connect your Router 4 1 Unplug the power to your DSL or Cable modem.
3 Plug in or turn on the power to your modem first. Wait about a minute and then plug in the power and turn on the router. Wait until the router is booted up (Power and wireless LEDs turn green). 4 If you are connecting wirelessly, you may now connect to the router using the supplied Wi-Fi Configuration Card for the Wi-Fi network name (SSID) and Wi-Fi password.
5 If you are configuring the DIR-867 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer. 6 Proceed with router configuration to set up your router. Configuration There are two ways to configure your router: A. Web Browser - Use a web browser from your computer. B. Wi-Fi Mobile app - Use a mobile device with the D-Link Wi-Fi Mobile app.
2 When the Welcome screen appears, click Next to continue. 3 The router will automatically detect your Internet connection type. If it cannot, then select your Internet connection and click Next to continue. For DSL (PPPoE) users, enter your PPPoE user name and password supplied by your ISP. Click Next to continue.
If you have a Static IP connection, enter the IP information and DNS settings supplied by your ISP. Click Next to continue. 4 Create a name and password for your Wi-Fi Network. Your wireless devices (i.e., tablets, smartphones, and laptops) will need to have this information entered to be able to connect to your wireless network. Click Next to continue. 5 Continue with the Setup Wizard to finish configuring your DIR-867 router.
B. Wi-Fi Mobile Setup 1 Scan the code below or search “D-Link Wi-Fi” (App Store or Google Play) to download the Wi-Fi Mobile app to your iPhone, iPad, or Android device. iOS 2 Android D-Link Wi-Fi App Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the wireless network name as listed on the supplied Wi-Fi Configuration card/sticker. Select the network and then enter the Wi-Fi Password.
Troubleshooting How do I connect my wireless devices to the DIR-867 router? 1. Open your wireless network utility that displays available wireless networks. 2. Select the Wi-Fi Network name you assigned in the wizard and connect. Note: If you did not run the setup wizard or you reset the router to its default settings, refer to the Wi-Fi Configuration Card included for the default Wi-Fi Network Name and Wi-Fi Password. You can also connect wireless devices to the DIR-867 router using WPS: 1.
GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.
Technical Support Having trouble installing your new product? D-Link’s website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website. United States Canada Internet: http://support.dlink.com Internet: http://support.dlink.ca Version 1.00 (US)_128x188 October 13 2017 610000008211 ©2017 D-Link Corporation/D-Link Systems, Inc. All rights reserved.
