User manual
36D-Link DIR-825 User Manual
Section 3 - Conguration
802.11n/a (5GHz)
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions.
Select the time frame that you would like your wireless
network enabled. The schedule may be set to Always.
Any schedule you create will be available in the drop-
down menu. Click New Schedule to create a schedule.
Service Set Identier (SSID) is the name of your wireless
network. Create a name for your wireless network using
up to 32 characters. The SSID is case-sensitive.
Select one of the following:
802.11a Only - Select if all of your wireless clients are 802.11a.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Mixed 802.11n and 802.11a - Select if you are using both 802.11n and 802.11a wireless clients.
The Auto Channel Scan setting can be selected to allow the DIR-825 to choose the channel with the least amount of interference.
Indicates the channel setting for the DIR-825. By default the channel is set to 6. The Channel can be changed to t the channel
setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will
be greyed out.
Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
Enable Wireless:
Schedule:
Wireless Network
Name:
802.11 Mode:
Enable Auto
Channel Scan:
Wireless Channel:
Transmission Rate: