Operation Manual
48D-Link DIR-810L User Manual
The following parameters will be available for conguration:
Wireless Band: Displays the wireless band being cong-
ured. The following conguration relates
to the 5GHz band.
Enable Wireless: Check the box to enable the wireless func-
tion at all times. If you do not want to use
wireless, uncheck the box to disable all
wireless functions. To set a schedule for
the times when you want the wireless net-
work to be available, click on the Add New
button to specify a new schedule.
Wireless Network Name: The Service Set Identier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The
SSID is case-sensitive.
802.11 Mode: Here the user can manually select the preferred frequency band to use for this wireless network.
Enable Auto Channel Scan: The auto channel selection setting can be selected to allow this device to choose the channel with the least
amount of interference.
Wireless Channel: If Auto Channel Scan is not enabled, users can manually select a wireless channel. By default the channel is set to
36. The channel can be changed to t the channel setting for an existing wireless network or to customize the wire-
less network.
Transmission Rate: Select the transmission rate. It is strongly suggested to select Best (Automatic) for best performance.
Channel Width: When using the 802.11n frequency band, user have an option to choose between a 20 MHz, 20/40 MHz, or
20/40/80 MHz bandwidth for 802.11ac.
Visibility Status: This option allows you to adjust the visibility of your SSID. If Visible is selected, the SSID of your wireless network
will be visible to any wireless clients within range of the signal. If Invisible mode is selected, clients must search for
the SSID of your wireless network manually in order to connect to the network.
Manual Setup - 5Ghz Band