Operation Manual

98D-Link DIR-810L User Manual
Section 3 - Conguration
Admin
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.
Tools
Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
Enter the new password for the User login. If you login as the User,
you cannot change the settings (you can only view them).
Enter a name for your router.
Enables a challenge-response test to require users to type letters or
numbers from a distorted image displayed on the screen to prevent
online hackers and unauthorized users from gaining access to your
router’s network settings.
Check to enable HTTPS to connect to the router securely. This means
to connect to the router, you must enter https://192.168.0.1 (for
example) instead of http://192.168.0.1.
Remote management allows the DIR-810L to be congured from
the Internet by a web browser. A username/password is still required
to access the Web Management interface.
The port number used to access the DIR-810L is used in the URL.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP
address of the DIR-810L and 8080 is the port used for the Web
Management interface.
If you have enabled HTTPS Server, you must enter https:// as part
of the URL to access the router remotely.
This section will list any rules that are created. You may click the Edit
icon to change the settings or enable/disable the rule, or click the
Delete icon to remove the rule. Details will display the current status.
Admin
Password:
User Password:
Gateway name:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin
Port:
Remote Admin
Inbound Filter: