User manual
42D-Link DIR-685 User Manual
Section 3 - Configuration
Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In
most cases, select Dynamic.
Enter the L2TP IP address supplied by your ISP (Static
only).
Enter the Subnet Mask supplied by your ISP (Static
only).
Enter the Gateway IP Address provided by your ISP.
Enter the IP address of the DNS Server supplied by your
ISP.
The default MAC Address is set to the WAN/Internet port’s
physical interface MAC address on the Broadband Router.
It is not recommended that you change the default MAC
address unless required by your ISP. You can use the
Clone MAC Address button to replace the WAN/Internet
port’s MAC address with the MAC address of your Ethernet
card.
Address Mode:
IP Address:
Subnet Mask:
Gateway:
Manual Internet Configuration
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a
username and password. This option is typically used for DSL services.
DNS:
MAC Address:
Server IP/Name:
L2TP Account:
L2TP Password:
Enter the L2TP Server IP address or name provided by your ISP (optional).
Enter your L2TP username.
Enter your L2TP password and then retype the password in the L2TP Conrm Password box.