Quick Installation Guide DIR-620 Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch
DIR-620 Quick Installation Guide BEFORE YOU BEGIN Delivery Package • Wireless router DIR-620 • Power adapter • Straight-through Ethernet cable (CAT 5E) • CD-ROM with “User Manual” and “Quick Installation Guide” • “Quick Installation Guide” (brochure) If any of the items are missing, please contact your reseller. ! Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
DIR-620 Quick Installation Guide System Requirements and Equipment • A computer with any operating system that supports a web browser. • A web browser to access the web-based interface of the router: Windows Internet Explorer, Mozilla Firefox, or Opera. • A NIC (Ethernet or Wi-Fi adapter) to connect to the router. • An 802.11b, g, or n Wi-Fi adapter to create a wireless network. • A USB modem to connect to the Internet1. ◦ A WiMAX USB modem to connect to the Internet via a WiMAX network.
DIR-620 Quick Installation Guide Supported USB Modems GSM modems • Huawei E150 • Huawei E1550 • Huawei E160G • Huawei E169G • Huawei E220 • ZTE MF626 • ZTE MF627. CDMA modems • Anydata ADU-500A • Celot CT-650. WiMAX modem • Samsung SWC-U200.
DIR-620 Quick Installation Guide CONNECTING TO PC (OS WINDOWS XP) PC with Ethernet Adapter 1. Make sure that your PC is powered off. 2. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC. 3. To connect via a WiMAX, 3G GSM or CDMA network: connect your USB modem to the USB port2 located on the front panel of the router.
DIR-620 Quick Installation Guide 2. In the Network Connections window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. 3. In the Local Area Connection Properties window, on the General tab, in the This connection uses the following items section, select the Internet Protocol (TCP/IP) line. Click the Properties button.
DIR-620 Quick Installation Guide 4. Select the Obtain an IP address automatically radio button. Click the OK button. Click the ОК button. Now your computer is configured to obtain an IP address automatically. PC with Wi-Fi Adapter 1. To connect via a WiMAX, 3G GSM or CDMA network: connect your USB modem to the USB port3 located on the front panel of the router.
DIR-620 Quick Installation Guide 3. Turn on your PC and wait until your operating system is completely loaded. 4. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in wireless NICs are equipped with a button or switch that turns on/off the wireless adapter (refer to your PC documents). If your PC is equipped with a pluggable wireless NIC, install the software provided with your Wi-Fi adapter. Now you should configure your Wi-Fi adapter. 1.
DIR-620 Quick Installation Guide CONFIGURING ROUTER Connecting to Web-based Interface 1. Start a web browser. 2. In the address bar of the web browser, enter the IP address of the router (by default, the following IP address is specified: 192.168.0.1). Press the Enter key. 3. On the opened page, enter the username (login) and password for the administrator account (by default, the following username and password are specified: admin, admin). Then click the Enter button.
DIR-620 Quick Installation Guide Right after the first access to the web-based interface you are forwarded to the page for changing the administrator password specified by default. Enter the new password in the Password and Confirmation fields. Then click the Save button. ! Remember or write down the new password for the administrator account.
DIR-620 Quick Installation Guide Configuring Connection to the Internet ! You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection. Otherwise contact your ISP. WiMAX WAN Connection 1.
DIR-620 Quick Installation Guide 3G WAN Connection 1. Go to the Net / Connections page and click the Add button. 2. In the General settings section, specify a name for your connection (any name for easier identification) in the Name field and select the 3G value from the Connection Type drop-down list. 3. In the Physical layer section, select the USB value from the Physical interface drop-down list. 4.
DIR-620 Quick Installation Guide PPPoE or IPoE WAN Connection 1. Go to the Net / Connections page and select the WAN connection. 2. In the General settings section, select a needed value from the Connection Type drop-down list. 3. In the Physical layer section, select the value corresponding to the INTERNET port of the router (port 5) from the Physical interface drop-down list. 4. If your ISP uses MAC address binding, enter the address registered by your ISP upon concluding the agreement in the MAC field.
DIR-620 Quick Installation Guide PPTP or L2TP WAN Connection 1. Go to the Net / Connections page and select the WAN connection. 2. In the General settings section, select the IPoE value from the Connection Type drop-down list. 3. In the Physical layer section, select the value corresponding to the INTERNET port of the router (port 5) from the Physical interface drop-down list. 4. If your ISP uses MAC address binding, enter the address registered by your ISP upon concluding the agreement in the MAC field.
DIR-620 Quick Installation Guide Configuring Local Area Network 1. Go to the Net / Connections page and select the LAN connection. If needed, change the IP address and subnet mask for the LAN interface of the router in the IP Address and Netmask fields of the IP settings section. Then click the Save button. 2. By default, the DHCP server of the router is enabled. On the DHCP server tab you can change the parameters of the DHCP server.
DIR-620 Quick Installation Guide Configuring Wireless Network By default, the wireless network of the router is open (it requires no password to access it). To avoid unauthorized access to your wireless local area network, change the default settings of the router. Example of Wireless Settings 1. Go to the Net / Wi-Fi page. 2. Go to the Security settings tab. 3. Select the WPA-PSK value from the Network Authentication dropdown list. 4.
DIR-620 Quick Installation Guide Saving Settings to Non-volatile Memory In order to avoid losing the new settings upon hardware reboot (accidental or intentional power-off of the device), it is recommended to save the settings to the non-volatile memory of the router. Click the Save&Reboot line in the top-page menu displayed when the mouse pointer is over the System caption. Wait until the router is rebooted.
DIR-620 Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by email/Internet. FOR TELEPHONE NUMBERS AND ADDRESSES OF D-LINK OFFICES WORLDWIDE VISIT http://www.dlink.
