User manual
18D-Link DIR-615 User Manual
Section 3 - Conguration
Tick the check box to enable IP Unnumbered on LAN (1-3)
interface and NAT on Wireless Interface.
Enter your PPPoE user name.
Enter your PPPoE password.
Retype the new password.
Enter the ISP Service Name (optional).
Enter the IP address (Static PPPoE only).
Enter the IP netmask (Static PPPoE only).
Enter Start and End LAN IP address.
Click Recieve DNS from ISP to get the DNS automatically.
Click Enter DNS Manually to enter the DNS information
below.
Enter the Primary and Secondary DNS Server Addresses.
Dual LAN
Enable:
User Name:
Password:
Conrm
Password:
Service Name:
IP Unnumbered
Address:
IP Unnumbered
Netmask:
LAN IP:
DNS:
DNS
Addresses:
Internet Setup
Static PPPoE
Click Static PPPoE radio button if your ISP uses a static PPPoE connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your
computer. The software is no longer needed and will not work through a router.