User manual
34D-Link DIR-600L User Manual
Section 3 - Conguration
MAC Filtering
Select Turn MAC Filtering OFF, Turn MAC Filtering ON and
ALLOW computers listed to access the network, or Turn
MAC Filtering ON and DENY computers listed to access
the network.
Enter the MAC address you would like to lter. To nd the
MAC address on a computer, please refer to the Networking
Basics section in this manual.
Select a DHCP client from the drop-down menu and click the
<< button to populate the required elds.
The schedule of time when the network lter will be enabled.
The schedule may be set to Always, which will allow the
particular service to always be enabled. You can create your
own times by clicking Add New.
Congure MAC
Filter:
MAC Address:
DHCP Client
List:
Schedule:
Use MAC Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network.
You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to
the Router.