User manual

72D-Link DIR-600 User Manual
Section 3 - Conguration
IPv6 Routing
The Routing option is an advanced method of customizing specic routes of data through your network.
To enable a route, check the box that is on the left side
of the route.
Use the drop-down menu to specify if the IP packet must
use the WAN or LAN interface to transit out of the Router.
Use the drop-down menu to specify if the IP packet must
use the WAN or LAN interface to transit out of the Router.
Enter the LAN (local) IPv6 address for the router and Prex
Length.
Enter the next hop that will be taken if this route is used.
Enable:
Metric:
Interface:
Destination IPv6
/ Prex Length:
Gateway: