User manual

50D-Link DIR-600 User Manual
Section 3 - Conguration
When you have nished conguring the rewall rules, click the Save Settings button at the top or bottom of the window to
save any changes made.
Select the protocol of the rewall port (All, TCP, UDP, or ICMP).
Enter the rst port of the range that will be used for the rewall rule in the top port range eld and enter the last port in the eld
underneath.
Use the drop-down menu to schedule the time that the Firewall rule will be enabled. The schedule may be set to Always, which will
allow the particular service to always be enabled. Click the New Schedule button to create your own times in the Tools > Schedules
section.
Protocol:
Port Range:
Select Schedule: