User manual

88D-Link DIR-600 User Manual

Section 12 - Troubleshooting

You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a

fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example,

lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network

we’re working with (1452+28=1480).

Once you nd your MTU, you can now congure your router with the proper MTU size.

To change the MTU rate on your router follow the steps below:

OK.

 OK to enter the web conguration

page for the device.

Setup and then click Manual Conﬁgure.

      button to save your

settings.

                

increments of ten.