User manual

44D-Link DIR-600 User Manual
Section 3 - Conguration

Use this option to save the current router
conguration settings to a le on the hard disk of the
computer you are using. First, click the  button.
You will then see a le dialog, where you can select
a location and le name for the settings.
Use this option to load previously saved router
configuration settings. First, use the Browse
control to nd a previously save le of conguration
settings. Then, click the Upload Settings button to
transfer those settings to the Router.
This option will restore all configuration settings
back to the settings that were in eect at the time
the router was shipped from the factory. Any settings
that have not been saved will be lost, including any
rules that you have created. If you want to save the
current router conguration settings, use the 
button above.
Click the Reboots button on the left side of the
window to restart the Router.

to Local Hard

Load Settings
from Local

Restore to

Settings:
Reboots:
This window allows you to save your conguration le to a hard drive, load conguration settings from a hard drive,
and restore the Router’s factory default settings.