User manual

43D-Link DIR-600 User Manual
Section 3 - Conguration
Enter a new Login Name for the Administrator account.
Enter a new password for the Administrator Login Name
and then retype the new password in the Conrm Password
textbox. The administrator can make changes to the
settings.
Remote management allows the DIR-600 to be congured
from the Internet by a web browser. A username and
password is still required to access the Web-Management
interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator
tasks. This feature enables you to perform Administrator
tasks from the remote (Internet) host.
The Internet IP address of the computer that has access to
the Broadband Router. If you input an asterisk (*) into this
eld, then any computer will be able to access the Router. Putting an asterisk (*) into this eld would present a security risk
and is not recommended.
The port number used to access the DIR-600. For example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of
the DIR-600 and 8080 is the port used for the Web-Management interface.
Login Name:
Administrator
Password:
Enable Remote
Management:
IP Allowed to
Access:
Port:

This window will allow you to change the Administrator password. You can also enable Remote Management.