Version 1.
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date 1.0 11 February, 2014 1.01 18 August, 2014 Description • Initial release for A1 version • Power Usage Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
Table of Contents Table of Contents Preface.................................................................................. i Manual Revisions............................................................................ i Trademarks....................................................................................... i Product Overview............................................................... 1 Package Contents..........................................................................
Table of Contents Configuration....................................................................59 Home...............................................................................................60 Current Status.......................................................................60 Internet....................................................................................61 Router......................................................................................67 Wi-Fi Clients................
Section 1 - Product Overview Package Contents Wi-Fi Configuration Note DIR-518L Quick Installation Guide Wi-Fi Configuration Card D-Link Cloud Service Mobile Apps Guide CD-ROM Depending on your region, a power plug adapter may also be included. If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the will cause damage and void the warranty for this product.
Section 1 - Product Overview System Requirements Network Requirements • Cable/DSL modem, 3G USB adapter, or a hotspot • IEEE 802.11b/g/n/ac wireless clients A computer or mobile device with the following: • Windows®, Macintosh, Linux-based, iOS, or Android™ operating system • An installed Wi-Fi adapter Web-based Configuration Utility Requirements Browser Requirements: • Internet Explorer® 8 or higher • Firefox® 12.
Section 1 - Product Overview Introduction The D-Link DIR-518L Wireless AC Mobile Cloud Companion lets you create a secure wireless network to share photos, files, music, and video on the go. Connect the router to a cable or DSL modem and share your high-speed Internet access with everyone on the network. Even when you are away from home, connect to a Wi-Fi hotspot to share your Internet access with your friends securely.
Section 1 - Product Overview Features • Advanced Wireless AC Technology - The DIR-518L provides up to 600 Mbps1 wireless speeds with other 802.11ac wireless clients using dual frequency bands to free up network congestion. This capability allows for smooth performance in video streaming, audio playback, and online gaming for multiple clients. • Access the Internet - The DIR-518L allows you to connect all of your wireless devices to the Internet via wired Broadband, 3G, or wireless hotspot.
Section 1 - Product Overview Hardware Overview Front/Top 1 2 1 2 Router/Charger Switch Power/Status LED D-Link DIR-518L User Manual Slide the switch to Router to operate the unit in router modes.1 Slide the switch to Charger to charge devices connected via USB. Green (Solid) The device is connected and working properly. Green (Blinking) The device is currently connecting via WPS. Orange (Blinking) The device cannot connect or provision an IP address from the uplink side.
Section 1 - Product Overview Hardware Overview Side/Bottom 3 4 5 6 3 WPS Button Press the WPS button to automatically connect additional devices to the unit securely. 4 Reset Button Pressing the Reset button restores the router to its original factory default settings. 5 USB Port Connect a 3G USB adapter to use Mobile Router Mode to share your Internet broadband. Connect a USB drive to share locally using mydlink SharePort and SharePort Web Access. Connect a device via USB cable to charge it.
Section 2 - Installation Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range.
Section 2 - Installation Connection Diagrams Broadband Router Setup In the Broadband Router Mode, the DIR-518L connects to your cable modem, DSL modem, or other Internet source via an Ethernet cable and wirelessly shares your Internet connection with other devices, providing Internet access for an entire home, office, or hotel room. You can then connect a USB drive to share files with these devices on your wireless network by using the SharePort feature.
Section 2 - Installation Mobile Router Setup In the Mobile Router Mode, you must have a compatible 3G USB adapter and be within your ISP’s cellular coverage. Once connected, you can then wirelessly share your Internet connection with other devices on the go. You can also share files with these devices on your wireless network by inserting a USB drive and using the SharePort feature. Note: Please check your local D-Link website for more information on compatible 3G USB adapters.
Section 2 - Installation Wi-Fi Hotspot Setup You can set up your DIR-518L to share a hotspot (for example, at a cafe) wirelessly with other devices. In the Wi-Fi Hotspot Mode, the DIR-518L connects wirelessly to another wireless network and then wirelessly shares your Internet connection with other devices. You must have the username and password for the access point you are connecting the DIR-518L to.
Section 2 - Installation LAN Sharing Setup Even without Internet broadband access, you can connect other Wi-Fi devices wirelessly to the DIR-518L by creating a private network anywhere. You can then connect a USB drive to locally share files with these devices on your wireless network via the SharePort feature. Note: In public environments, it is highly recommended to password protect the private LAN on the DIR-518L.
Section 2 - Installation Setting Up Your DIR-518L Plug in the DIR-518L to a power outlet. Verify that the power LED is solid red before continuing. Note: If your device includes a regional power plug adapter, please follow the additional steps before plugging your DIR-518L to a power outlet. Outlet 1. Fold the prongs in. 2. Clip in the plug adapter as shown on the right. 2 1 3. Plug the DIR-518L to your wall outlet.
Section 2 - Installation Connecting Your Equipment Depending on your equipment, the DIR-518L can be set up easily from any device with Wi-Fi and a Web browser. Using Broadband Ethernet: You will need an Ethernet cable connection to your cable or DSL modem. • Connect one end of an Ethernet cable to your modem and the other end to the Internet port on the DIR-518L. Using a 3G USB Adapter: You will need a compatible 3G USB adapter with an active SIM card.
Section 2 - Installation Connecting to Your DIR-518L Using WPS You can use the WPS method to connect to the DIR-518L. • Press the WPS button on the DIR-518L and its green LED will flash. • Activate WPS on your client device and it should connect automatically. Once you are connected to the DIR-518L, you can then configure your DIR-518L using the web-based configuration in a web browser. For more information on WPS, please refer to “WPS Button” on page 93.
Section 2 - Installation Manually Connecting to Your DIR-518L You can also connect to the DIR-518L manually before configuring it for network access. • Turn on DIR-518L by sliding the Router/Charger switch to Router. • On your computer or mobile device, connect to the DIR-518L’s wireless network. Locate the Wi-Fi name (SSID) and password for your device as printed on the included Wi-Fi Configuration Card.
Section 2 - Installation After logging in, you will see the Current Status page. If the Internet icon is blue and there is a mark, you are already connected to the Internet and the device is ready for use! If the Internet icon is grey and there is an icon, please go to “Configuring Your DIR-518L” on page 17 to configure your router.
Section 2 - Installation Configuring Your DIR-518L If your DIR-518L requires further configuration, you can open a Web browser on your computer and use the web GUI. For detailed information on either of the methods for configuring your DIR-518L, refer to the following sections of the manual: • “xDSL Broadband (PPPoE)” on page 73 if you are using an xDSL modem. • “3G Wireless USB” on page 74 if you are using a 3G USB adapter. • “Wi-Fi Hotspot Client” on page 75 if you are connecting to a Wi-Fi hotspot.
Section 3 - Usage Sharing Files Using the mydlink SharePort app for iPad®, iPhone®, and iPod touch® The mydlink SharePort app is a streamlined mobile application that allows you to conveniently stream media and share files stored on a removable storage connected to your router. Once the router is set up, you can start the app and easily connect from a local network or through the Internet to access your photos, videos, music, and documents.
Section 3 - Usage 3. Use your iPhone, iPad or iPod Touch to search for and download the free mydlink SharePort app from the App Store. If you have a QR code reader, you can scan the code for mydlink SharePort to the right. 4. If you are connecting to the router from a local network: On your mobile device, go to your Wi-Fi settings and connect to your router’s wireless network using the default Wi-Fi settings.
Section 3 - Usage 5. Tap the mydlink SharePort icon, and the app will load. 6. At the mydlink SharePort device list page, tap the gear icon at the top right to enter the Settings page. 7. Enter your Admin Login and your mydlink Account Login information in the fields and click Done. You will be taken back to the device list where you can select the device for use with mydlink SharePort. 8. You can now use the mydlink SharePort app interface to stream media and access files stored on your removable drive.
Section 3 - Usage Main Menu The mydlink SharePort main menu has different sections that let you see all the documents, photos, movies, or music stored on your removable storage. Tap < or >, or swipe left or right to move between the different sections. The Wi-Fi icon at the bottom indicates an active local network connection (blue) or remote connection (green/red). Tap the gear icon if it is not lit. Tap on the document icon to view documents. Tap the camera icon to view photos.
Section 3 - Usage Documents The Documents section allows you to share, print, and view documents streamed from your DIR-518L to your mobile device. Tap the document icon on the main menu to browse the documents on your mobile device. Search Bar: Enter a filename here to search your storage. Tap to mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options: • Open In...
Section 3 - Usage Tap on a file to start the document viewer. In the viewer: Tap to add/remove the file from your Favorites. Tap to bring up the same options as >. Note: Some files may require a third-party app to view them.
Section 3 - Usage Pictures The Pictures section allows you to stream images from your DIR-518L to your mobile device. Tap the camera icon on the main menu to browse your photo collection on your removable storage. Search Bar: Enter a filename here to search your storage. Tap to mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options: • Open In...
Section 3 - Usage Tap on a file to start the photo viewer. In the viewer: Tap to add/remove the current image from your Favorites. Tap to start the slideshow. Tap to bring up the same options as >.
Section 3 - Usage Videos The Videos section allows you to stream video clips and movies from your DIR-518L to your mobile device. Tap the movie icon on the main menu to browse your videos on your removable storage. Search Bar: Enter a filename here to search for a specific file. Tap to mark files for deletion. Tap the star icon next to a file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options: • Open In...
Section 3 - Usage Tap on a file to start playing it. In the player: Tap to play/pause the video. You can scroll to any time on the time line by holding and sliding your finger. Tap to enter/exit fullscreen mode. Tap to add/remove the file from your Favorites. Tapping this icon gives you additional options: • Open In...: Lets you use a third-party app to open the file.
Section 3 - Usage Music The Music section allows you to stream songs from your DIR-518L to your mobile device. Tap the music icon on the main menu to browse your music collection on your removable storage. Search Bar: Enter a filename here to search your storage. Tap to create a playlist and mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options: • Open In...
Section 3 - Usage Tap on a file to start playing it. In the player: Tap to repeat all. Tap again to repeat a single song. Tap to skip to the previous/next song. Tap to enable/disable shuffle mode. To create a playlist: • Tap Edit > Add Playlist. • Enter a name for the playlist, then tap Save. • The name of the playlist will appear in the browser next to the icon.
Section 3 - Usage To add songs to a playlist: • Tap the playlist in the browser. • Tap Add Music... to add songs to the current playlist. • Tick the songs you wish to add and tap Done. To delete songs from the playlist: • Tap Edit in the playlist browser and mark the files to be deleted. • Tap Delete.
Section 3 - Usage Folders You can browse your removable storage in a folder view in the folders section. Tapping the filename will open the viewer/player for that file type as described in the previous pages. You can also upload files from your mobile device to the removable storage attached to your router. Search Bar: Enter a filename here to search your storage. Tap to take you to the editing screen where you can add a folder and mark files for deletion or copying.
Section 3 - Usage To delete files: • Tap Edit at the top right. • Tick the circle next to a file to mark it for deletion. • Tap on Delete at the bottom to delete the file. To copy files: • Tap on Copy to bring up a window where you can select the folder to copy to. • Browse to the directory you want to copy the marked files to and tap Paste. • You can also tap Add Folder to create a new folder. To create a new folder: • Browse to the directory you wish to create a new folder in.
Section 3 - Usage To upload images and videos from your mobile device: • Browse to the folder you wish to upload to. • Tap Upload at the bottom. • Select the photos/videos you wish to upload. • Tap Done. During the upload process, the size of the file and the upload progress will be displayed. To upload more files, tap the + icon at the top right and repeat the steps listed above.
Section 3 - Usage Favorites The Favorites section allows you to quickly access your most often used files, no matter what file type, in a special section. Files added to the Favorites section will be copied here for playback in a centralized location. Tap to mark files for deletion from the local storage in Favorites. The file will still be accessible in other mydlink SharePort sections. Tapping this icon gives you additional options depending on the file type.
Section 3 - Usage Using the mydlink SharePort app for Android™ The mydlink SharePort app is a streamlined mobile application that allows you to conveniently stream media and share files stored on a removable storage connected to your router. Once the router is set up, you can start the app and easily connect from a local network or through the Internet to access your photos, videos, music, and documents.
Section 3 - Usage 3. Use your Android mobile device to search for and download the free mydlink SharePort app from Google Play™. If you have a QR code reader, you can scan the code for mydlink SharePort to the right. 4. If you are connecting to the router from a local network: On your mobile device, go to your Wi-Fi settings and connect to your router’s wireless network using the default Wi-Fi settings.
Section 3 - Usage 5. Tap the mydlink SharePort icon, and the app will load. 6. At the mydlink SharePort device list page, tap the gear icon at the top right to enter the Settings page. 7. Enter your Admin Login and your mydlink Account Login information in the fields and click Apply. You will be taken back to the device list where you can select the device for use with mydlink SharePort. 8.
Section 3 - Usage Main Menu The mydlink SharePort main menu has different sections that let you see all the documents, photos, movies, or music stored on your removable storage. Tap < or >, or swipe left or right to move between the different sections. The Wi-Fi icon at the bottom indicates an active local network connection (blue) or remote connection (green/red). Tap the gear icon if it is not lit. Tap on the document icon to view documents. Tap the camera icon to view pictures.
Section 3 - Usage Documents The Documents section allows you to share, print, and view documents streamed from your DIR-518L to your mobile device. Tap the document icon on the main menu to browse the files on your mobile device. Search Bar: Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section.
Section 3 - Usage Tap on a file to start the document viewer. In the viewer: • Tap the screen to bring up zoom in/out buttons. • Drag the screen up or down to scroll between pages. • Tap to perform File, Find, Zoom, Reading View, Go To Page, and Bookmarks actions. Note: Available actions may differ depending on your Android OS.
Section 3 - Usage Pictures The Pictures section allows you to view images streamed from your DIR-518L to your mobile device. Tap the camera icon on the main menu to browse your photo collection on your removable storage. Search Bar: Type in the name of a file to search for it. Tap to return to the main menu. Tap to start a slideshow. Tap to refresh, sort, or mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section.
Section 3 - Usage Tap on an image file to start the image viewer. In the viewer: Tap the star icon to download it to your device and add it into your Favorites section. Tap to start a slideshow. Tap the image to stop the slideshow. Tap to delete the current image. Tap OK to confirm. Tap to bring up additional options using other applications. Tap to access the image editor. Note: This function may vary depending on the version of your Android OS.
Section 3 - Usage Videos The Videos section allows you to stream video clips and movies from your DIR-518L to your mobile device. Tap the movie icon on the main menu to browse your videos on your removable storage. Search Bar: Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap the star icon next to a file to download it to your device and add it into your Favorites section.
Section 3 - Usage Tap on a file to start playing it. Tap on the screen to bring up the scroll bar, pause button, and play button. Tap to resume playback. Tap to pause the video. Note: Available features may vary depending on the Android OS version installed on your device.
Section 3 - Usage Music The Music section allows you to stream songs from your DIR-518L to your mobile device. Tap the music icon on the main menu to browse your music collection on your removable storage. Search Bar: Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap to browse your playlists. Tap the star icon next to a file to download it to your device and add it into your Favorites section.
Section 3 - Usage Tap on a file to start playing it. In the player: Tap on the up/down arrow to show/hide the player controls. Tap to repeat all. Tap again to repeat a single song. Tap to skip to the previous/next song. Tap to play or pause the song. Tap to enable/disable shuffle mode. To create a playlist: • Tap • Tap Add new playlist... • Enter a name for the playlist, then tap OK. The name of the playlist icon.
Section 3 - Usage To add songs to a playlist: • Tap a playlist to see its contents. • Tap Add Music... to add songs to the current playlist. • Tick the songs you wish to add and tap to save. To delete songs from the playlist: • Tap Edit in the playlist browser and mark the files to be deleted. • Tap then tap OK to confirm.
Section 3 - Usage Folders You can browse your removable storage in a folder view in the folders section. Tapping the filename will open the viewer/player for that file type as described in the previous pages. You can also upload files from your mobile device to the removable storage attached to your router. Search Bar: Type in the name of a file to search for it. Tap to return to the main menu. Tap to access file options. In the file browser: Tap to return to the main menu. Tap to upload files.
Section 3 - Usage Tap to select files and perform the following actions: Tap to update the list of files. Tap to sort the files by name, size, type, or date. Tap to create a new folder. Mark a file then tap this icon to delete it. Mark a file then tap this icon to copy it. To delete files: • Tap on • Tap on and tick the box next to a file for deletion. to delete your selected files. Tap OK to confirm. To copy files: • Tap on to select files for copying. Tick the box next to each file for copying.
Section 3 - Usage • Tap Paste or Cancel. • You can also tap New Folder if you wish to create a folder in the current directory. To create a new folder: • Browse to the directory you wish to create a new folder in. • Tap then . • Enter the name of the folder in the box, then tap OK.
Section 3 - Usage To upload images and videos from your mobile device: • Browse to the folder you wish to upload to. • Tap and browse to the file or files you wish to upload from the local device. • Tick the box next to each of the files you wish to upload. • Tap Upload. During the upload process, the size of the file and the upload progress will be displayed under the file name. • To remove a file from the upload queue, tap the X next to it.
Section 3 - Usage Favorites The Favorites section allows you to quickly access your most often used files, no matter what file type, in a special section. Files added to the Favorites section will be copied here for playback in a centralized location. Search Bar: Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap for additional options: Tap to return to the main menu. Tap to update the list of files.
Section 3 - Usage Using SharePort Web Access SharePort Web Access lets you stream music, photos, and movies from a USB drive attached to your DIR-518L through a Web browser. You can also download and upload files to and from a computer through the Web browser interface. • Type http://shareport.local. in your browser’s URL to take you to the SharePort Web Access log in page. • Log in with your admin password or a SharePort Username and Password.
Section 3 - Usage The folder browser section will show folder hierarchy at the left and files at the right. You can quickly browse directories and perform operations by using the buttons in the folder browser view. • Click to return to the main menu. To create a new folder: • Click New Folder in the current directory. • Enter a folder name in the Create Folder pop-up. • Click OK. The new folder will appear in the left column. To upload a file: • Click Upload to upload a file to the current folder.
Section 3 - Usage Music You can go to the Music section to browse and play the music files on your storage. Click Back to return to the main menu. • Click on the audio filename to play it in the browser. You can pause, seek, mute and adjust the volume in the window. • Close the window to end playback.
Section 3 - Usage Pictures You can go to the Pictures section to browse and view the image files on your storage. Click Back to return to the main menu. • Click on the image name to view it in the browser. • Hover your mouse over the left or right side of the image and click < or > to view the previous or next image.
Section 3 - Usage Videos You can go to the Videos section to browse and play the video files on your storage. Click Back to return to the main menu. • Click on the video file to open the file in a window for streaming. You can pause, seek, mute, adjust the volume, and activate full screen mode in the window controls. • Close the window to end playback. Note: Depending on your browser, the video file may be played back using the default player associated with that file format.
Section 3 - Usage Documents You can go to the Documents section to open and save files from your storage to your computer. Click Back to return to the main menu. • Click on the filename to open the file. • Depending on the file type, the default program will be started or a pop-up may ask you to open or save the file.
Section 4 - Configuration Configuration Before you can use your DIR-518L, you will need to access its configuration utility by using a Web browser. • To access the configuration utility of the DIR-518L, open a Web browser and enter http://dlinkrouter.local. or http://dlinkrouter. in the address bar. • Enter your password for the Admin account. By default, the password is blank. • Click Log In.
Section 4 - Configuration Home The Home page will display a diagram with icons indicating the statuses of various functions and connections. Clicking on an icon with an next to it will start a wizard for that function. You may also click on the to configure your Internet connection. If the link to the Internet shows , this means your router has been assigned an uplink IP but does not have Internet access. You will need to contact your service provider.
Section 4 - Configuration Internet Broadband Ethernet If you have connected the DIR-518L to a cable modem via an Ethernet cable, your Internet should be connected and ready for use. The Internet icon will be blue and the connection will have a check mark . If you have connected the DIR-518L to an xDSL modem via an Ethernet cable but can not access the Internet: • Click on the Internet icon to start the wizard. • Enter the Username and Password as provided by your Internet Service Provider. • Click Save.
Section 4 - Configuration Once you are connected: • Click on the Internet icon to display the IPv4 network details below the diagram. You can view the IPv6 details by clicking at the top right. Note: This information will be saved as an xDSL Broadband (PPPoE) Internet Profile for future use. • Click on Release if you wish to disconnect from the Internet. Click Renew to reconnect to the Internet.
Section 4 - Configuration 3G Mobile Broadband You can connect a compatible 3G USB adapter to the USB port on the DIR-518L to access the Internet. Depending on your mobile service provider, you may have to input optional settings before use. You may need to contact your service provider regarding these details. APN: Enter your service provider’s APN. Dial-Up Num- Enter the dial-up number required by your service ber (optional): provider. Username Enter the username provided by your service provider.
Section 4 - Configuration When you are connected to the Internet via mobile broadband, the Internet icon should be blue and the link will have a green check mark . Clicking on the Internet icon will display the 3G network details. You may click on the Disconnect button to drop the 3G connection . Connection Type: Displays whether it is a 3G network. Operator: Displays the country name and service provider. Network Network Status: Displays the status of the connection to the 3G network.
Section 4 - Configuration Wi-Fi Hotspot On the Home page, when you wish to connect to the Internet via a Wi-Fi hotspot, there will be a Click it to start the wizard. next to the Internet icon. • Click Next to scan available Wi-Fi networks. • Click on the hotspot network you wish to connect to and click Select. • You will need to enter a password if there is a lock icon next to that network. Enter the password and click Save. You will need to wait while the router connects to the network.
Section 4 - Configuration Once you are connected, the Internet icon will be blue and the status diagram will show a green check mark when the connection is established. You can now click on the Internet icon in the Current Status diagram to see details of the connection. You may also click on the button to Disconnect from this network . Connection Type: Displays whether it is a hotspot network connection. Network Status: Displays the status of the connection to the hotspot network.
Section 4 - Configuration Router On the home page, you can proceed to secure your wireless network. To secure your network, you may customize your Wi-Fi Network Name (SSID) and Password by clicking on the router icon. You may also customize the 2.4 GHz and 5 GHz network settings independently. • Click on the router icon with the start the wizard. next to “DIR-518L” to • Click Secure your network in the pop-up.
Section 4 - Configuration Devices may now connect to the network using the new SSID and password. The will no longer be displayed on the Home page. For Network, please refer to “Network” on page 80. For Wi-Fi, please refer to “Wireless” on page 77.
Section 4 - Configuration Wi-Fi Clients On the Home page, clicking on the Wi-Fi Clients icon takes you to a page where you can see a list of all devices connected to your Wi-Fi network on both the 2.4 GHz and 5 GHz bands. • Click on the Wi-Fi icon to access Wi-Fi client details. The box for each device will show its connection status, name, vendor, IP address, and access status. To change the settings for each device, you can click on the pencil icon to bring up a new window.
Section 4 - Configuration USB Storage If you have a USB drive attached to the DIR-518L, you can view the storage details from the Home page via the USB Storage pane. • Click on the USB Storage icon to access storage details. USB DEVICE Available Space: Displays the amount of free space on the USB storage. Total: Displays the total capacity of the USB storage. UPnP MEDIA SERVER Status: Displays if UPnP is enabled or disabled.
Section 4 - Configuration Settings Internet Profiles Internet Profiles are networks you want the device to remember and reconnect to in the future. Profiles are created automatically the first time you connect to a particular network. The Profile List shows all of the saved profiles and you can select the profile you wish to use by clicking on the radio button. You may also Add, Edit, and Delete profiles from this page. To Add a profile: • Click Add Profile.
Section 4 - Configuration DHCP Depending on your connection method and your service provider, you may select the default DHCP profile to automatically connect to the Internet. Click on the pencil to edit it. Click Save to store your settings. Host Name: Enter the name of your host. MAC Address Clone: Type in the MAC address or select the client from the drop-down menu and click <<.
Section 4 - Configuration xDSL Broadband (PPPoE) Depending on your Internet Service Provider, you may need to configure the PPPoE settings in order to connect to the Internet. You may need to contact your ISP for this information. Click Save to store your settings. My Internet Select xDSL Broadband (PPPoE) from the drop-down list. Connection is: Profile Name: Enter a custom name for this profile. Username: Enter the username assigned by your ISP. Password: Enter the password assigned by your ISP.
Section 4 - Configuration 3G Wireless USB Depending on the service provider for your 3G wireless service, you may need to configure the 3G settings in order to connect to the Internet. You may need to contact your ISP for this information. Click Save to store your settings. My Internet Select 3G Wireless USB from the drop-down list. Connection Is: Profile Name: Enter a custom name for this profile. Dial-up Number: Enter your service provider’s dial-up number. APN: Enter the password assigned by your ISP.
Section 4 - Configuration Wi-Fi Hotspot Client This is the Wi-Fi Hotspot page; you may need to configure the settings in order to connect to the Internet. You may need to contact your hotspot provider for this information. Click Save to store your settings. Hotspot Network Enter the name of your hotspot or click Scan to select Name (SSID): from a list. Please refer to “Wi-Fi Hotspot” on page 65 for detailed steps.
Section 4 - Configuration Static IP Depending on your Internet Service Provider, you may need to configure the static IP settings in order to connect to the Internet. You may need to contact your service provider for this information. Click Save to store your settings. My Internet Static IP will be displayed for this profile. Connection Is: IP Address: Enter the IP address assigned by your ISP. Subnet Mask: Enter the Subnet Mask assigned by your ISP.
Section 4 - Configuration Wireless To secure your Wi-Fi network manually and/or access advanced settings, you can go to the Wireless page under Settings. You can configure the settings for both the 2.4 GHz and 5 GHz bands on this page. Click Save to store your settings. 2.4 GHz Wi-Fi Network Name Enter a custom name for your 2.4 GHz network. (SSID): Password: Enter a custom password for your network. ADVANCED SETTINGS Security Mode: Select from None or WPA/WPA2-Personal 802.11 Mode: 802.
Section 4 - Configuration 5 GHz Wi-Fi Network Name Enter a custom name for your 5 GHz network. (SSID): Password: Enter a custom password for your network. ADVANCED SETTINGS Security Mode: Select from None or WPA/WPA2-Personal 802.11 Mode: 802.11a Only - Select only if all of your wireless clients are 802.11b. 802.11n Only - Select only if all of your wireless clients are 802.11g. Mixed 802.11a/n - Select if you are using both 802.11a and 802.11n wireless clients. 802.
Section 4 - Configuration Guest Zone You can create a Wi-Fi Guest Zone to share Internet access with guests on a separate Wi-Fi network for both the 2.4 GHz and 5 GHz networks. This is useful when you wish to block guests from accessing devices on your home network. Click Save to store the settings. GUEST ZONE Status: Enable or disable the Guest Zone feature. Guest Zone Wi-Fi Enter a custom Guest Zone name. Name (SSID): Password: Enter a password for your Guest Zone.
Section 4 - Configuration Network You can configure the local network settings for your router by going to Network under Settings. Click Save to store your settings. NETWORK SETTINGS LAN IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Save Settings, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the Subnet Mask. The default subnet mask is 255.255.
Section 4 - Configuration DHCP SERVER Status: Slide to enable or disable the DHCP server function. DHCP IP Address Enter the starting and ending IP addresses for the DHCP Range: server’s IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease Time: The length of time for the IP address lease. Enter the Lease time in minutes.
Section 4 - Configuration SharePort On this page, you can configure the various storage sharing features of your router. The DLNA server allows you to stream stored pictures, music, and video to another DLNA-compatible device on your network. SharePort Web Access allows you to use a Web browser to access stored files from a PC connected to your network. Click Save to store your settings. DLNA MEDIA SERVER Status: Slide to enable or disable the DLNA Media Server function.
Section 4 - Configuration You can manage your user accounts and their access privileges for SharePort Web Access by clicking on the Create User tab. The list displays the User Name, Access Path, and Permission of all saved users. CREATE USER • To Edit a user, click on the pencil icon. • To Delete a user, click on the trash icon. • To Create a user, click on Create User. A window with the following fields will appear: User Name: Enter a username for the new user. Password: Enter a password for the new user.
Section 4 - Configuration You can now log in to SharePort Web Access with any of the accounts you created by typing http://shareport.local. in your browser URL to access the log in page.
Section 4 - Configuration mydlink Setting and registering your router with mydlink will allow you to use its mydlink cloud services features, including online access and management of your router through the mydlink portal website. If you have an existing account: • Select Yes, I have a mydlink account. • Log in with the E-mail address and password that you signed up with. • Click the Save button.
Section 4 - Configuration If you do not have an account: • Select No, I want to create a new mydlink account. • Fill in the following fields. • Read and tick the checkbox next to I accept the mydlink terms and conditions. • Click the Sign Up button. Note: If you have not set an admin password, you will be asked to do so now. Click Save.
Section 4 - Configuration Accessing Settings>mydlink will now display a summary of your mydlink Service status and mydlink Account. Note: After mydlink registration is completed, your router’s default PPPoE connection will be set to Always On. If your ISP charges for usage, you may wish to manually choose Dial On Demand as your default setting, however, mydlink features may not work as intended.
Section 4 - Configuration Management Admin On this page, you can change the admin security settings for logging in to the router configuration interface. It is highly recommended that you create a password with a minimum of 6 characters to keep your router secure. Click on the System tab to configure system settings for your router. Click Save to store your settings. Admin Password: Enter a password to secure administrative access to your router.
Section 4 - Configuration ADVANCED SETTINGS Enable HTTPS Server: Enable the HTTPS server on the device. Enable Remote Enable management of this device from a remote location Management: via the Internet. Remote Admin Port: Enter the port you wish to use for remote management. Use HTTPS: Enable HTTPS encryption for this connection.
Section 4 - Configuration System Here, you can save or restore your router settings to and from a file. You can also reset your router to the factory default settings and reboot the router. Save Settings to Use this option to save the current router configuration Local Hard Drive: settings to a file on the hard disk of the computer you are using. First, click the Save button. A file dialog will appear, allowing you to select a location and file name for the settings.
Section 4 - Configuration Upgrade This page displays your current firmware version and allows you to check for and download new firmware. After downloading the firmware, you can then upload it from this page. FIRMWARE INFORMATION Current Firmware Displays the version of the installed firmware. Version: Current Firmware Displays the date of the installed firmware. Date: Click Download New Firmware to retrieve the latest version.
Section 5 - Status Statistics This page provides statistics about data transmitted and received by your router through the Internet (WAN) on your router’s 2.4 GHz and 5 GHz wireless networks. The graph displays the real-time upstream and downstream transfer speeds depending on which tab (Internet or Wi-Fi) you are currently viewing. The Blue line indicates the upload speeds and the red line indicates the download speeds. Click Clear to reset the statistics.
Section 6 - Connecting a Wireless Client Connecting a Wireless Client WPS Button The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the router.
Section 6 - Connecting a Wireless Client Windows® 8 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar, next to the time display.
Section 6 - Connecting a Wireless Client You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function.
Section 6 - Connecting a Wireless Client Windows® 7 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area.
Section 6 - Connecting a Wireless Client 3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router.
Section 6 - Connecting a Wireless Client 5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
Section 6 - Connecting a Wireless Client Windows Vista® Windows Vista® users may use the built-in wireless utility. If you are using a third-party utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows Vista® utility as seen below. If you receive the Wireless Networks Detected pop-up, click on the center of the window to access the utility.
Section 6 - Connecting a Wireless Client WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2.
Section 6 - Connecting a Wireless Client 3. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
Section 6 - Connecting a Wireless Client Windows® XP Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.
Section 6 - Connecting a Wireless Client WPA/WPA2 It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2.
Section 6 - Connecting a Wireless Client 3. The Wireless Network Connection box will appear. Enter the WPAPSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router.
Section 7 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-518L. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples. 1. Why can’t I access the web-based configuration? When entering http://dlinkrouter.local.
Section 7 - Troubleshooting Configure your Internet settings: • Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
Section 7 - Troubleshooting 3. Why can’t I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL.
Section 7 - Troubleshooting To change the MTU rate on your router follow the steps below: • Open your browser, enter the IP address of your router (192.168.0.1, http://dlinkrouter.local. or http://dlinkrouter.) and click OK. • Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. • Click on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click Save Settings to save your settings.
Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
Appendix A - Wireless Basics What is Wireless? Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford.
Appendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.
Appendix A - Wireless Basics Where is wireless used? Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.
Appendix A - Wireless Basics Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router.
Appendix B - Networking Basics Networking Basics Check your IP Address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. In Windows: Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter.
Appendix B - Networking Basics Assign a Static IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows® 7 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Windows® XP - Click on Start > Control Panel > Network Connections.
Appendix B - Networking Basics Example: If the router´s LAN IP address is 192.168.0.1 or http://dlinkrouter.local., make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1 or http://dlinkrouter.local.). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1 or http://dlinkrouter.local.).
Appendix C - Technical Specifications Technical Specifications Standards • IEEE 802.11b/g/n • IEEE 802.11a/n • IEEE 802.11ac • IEEE 802.3 • IEEE 802.3u • IEEE 802.3x Internet Modes • Broadband Router Mode • Mobile Router Mode • Wi-Fi Hotspot Mode Wireless Frequency Range 1 • 802.11b/g/n: 2.4 GHz to 2.497 GHz • 802.11a/n/ac: 5.15 GHz to 5.85 GHz Security • Wi-Fi Protected Access (WPA/WPA2) • WPS 2.
Appendix C - Technical Specifications IEEE 802.11n HT20(5 GHz): • 15 dBm (+/-2dB) at MCS0~1 • 14 dBm (+/-2dB) at MCS2~3 • 13 dBm (+/-2dB) at MCS4~5 • 12 dBm (+/-2dB) at MCS6~7 IEEE 802.11n HT40(5 GHz): • 15 dBm (+/-2dB) at MCS0~1 • 14 dBm (+/-2dB) at MCS2~3 • 13 dBm (+/-2dB) at MCS4~5 • 12 dBm (+/-2dB) at MCS6~7 IEEE 802.
Appendix C - Technical Specifications • –71 dBm at MCS3 • –67 dBm at MCS4 • –63 dBm at MCS5 • –62 dBm at MCS6 • –61 dBm at MCS7 IEEE 802.11n HT20(5 GHz): • -82 dBm at MCS-0 • -79 dBm at MCS-1 • -77 dBm at MCS-2 • -77 dBm at MCS-3 • -70 dBm at MCS-4 • -66 dBm at MCS-5 • -65 dBm at MCS-6 • -64 dBm at MCS-7 IEEE 802.11n HT40(5 GHz): • -79 dBm at MCS-0 • -76 dBm at MCS-1 • -74 dBm at MCS-2 • -71 dBm at MCS-3 • -67 dBm at MCS-4 • -63 dBm at MCS-5 • -62 dBm at MCS-6 • -61 dBm at MCS-7 IEEE 802.
Appendix C - Technical Specifications USB Interface • USB 2.0 Type A Electrical • Max Operating Voltage: AC 100/240V 50~60 Hz • Max Power Consumption: 10 W • USB Type A Output: Max 1000 mA (Charger), Max 500 mA (Router) • (EU/AU/UK plug not included) Image: • .jpg, .bmp, .png Document: • Microsoft Office formats, .
Appendix D - GPL Code Statement GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.
Appendix D - GPL Code Statement Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users.
Appendix D - GPL Code Statement Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free.
Appendix D - GPL Code Statement 1. Source Code. The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any non-source form of a work. A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.
Appendix D - GPL Code Statement 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work.
Appendix D - GPL Code Statement 4. Conveying Verbatim Copies.
Appendix D - GPL Code Statement 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange.
Appendix D - GPL Code Statement A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage.
Appendix D - GPL Code Statement 7. Additional Terms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law.
Appendix D - GPL Code Statement All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term.
Appendix D - GPL Code Statement from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program.
Appendix D - GPL Code Statement 11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’s “contributor version”.
Appendix D - GPL Code Statement A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License.
Appendix D - GPL Code Statement 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
Appendix D - GPL Code Statement 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
Appendix E - Safety Statements CE Mark Warning: Safety Statements This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix E - Safety Statements operated with minimum distance 20 cm between the radiator & your body. IMPORTANT NOTE : (For Portable Device Configuration) Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C.
Appendix E - Safety Statements Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
