User manual

62D-Link DIR-506L User Manual
Section 3 - Conguration
Save Settings
To Local Hard
Drive:
Load Settings
From Local Hard
Drive:
Restore to
Factory Default
Settings:
Click the Save button to save the current repeater
conguration settings to a le on the hard disk of the
computer you are using. You will then see a le dialog
where you can select a location and le name for the
settings.
Use this option to load previously saved conguration
settings. Click Browse to find a previously saved
conguration le. Click the Upload Settings button to
transfer those settings to the DIR-506L.
This option will restore all conguration settings back to
the factory default settings. Any settings that have not
been saved will be lost, including any rules that you have
created. If you want to save your current conguration
settings, use the Save button above.
Note: Restoring the factory default settings will not reset the
Wi-Fi Protected Status to Not Congured.
System
System Settings allows you to save and restore your conguration, reset and reboot the DIR-506L, and remove any added
language packs.