User manual
Table Of Contents

52D-Link DIR-506L User Manual
Section 3 - Conguration
Check the Enable box to allow inbound ltering rules.
Click the drop-down menu to select how you want the
rule to be scheduled.
This section will list any rules that are created. You may
click the Edit icon to change the settings or enable/
disable the rule, or click the Delete icon to remove the
rule.
Allow or Deny passage of addresses and ports that match
the lter rules you set.
Enter the source IP address and port. Enter 0.0.0.0 if you
do not want to specify an IP range.
Enter the destination IP address and port. Enter 0.0.0.0 if
you do not want to specify an IP range.
Check this box to enable the rule you are creating.
Provide an identication number for the rule.
Click the Add button to apply your settings.
Inbound Filter:
Use schedule
rule:
Inbound Filter
Rules List:
Allow/Deny all
to pass:
Source IP and
Ports:
Destination IP
and Ports:
Enable:
Schedule Rule #:
Add New Rule:
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature, you can
congure inbound data ltering rules that control data based on an IP address range. Inbound Filters can be used with Virtual
Server, Port Forwarding or Remote Administration features. You must click Save Settings at the top to save the settings. Note
this option is only available in Router mode.
Inbound Filter