User manual

49D-Link DIR-506L User Manual
Section 3 - Conguration
MAC Address Filter
Click Enable to allow MAC ltering.
When this option is selected, only PCs and devices with MAC
addresses listed below with the ‘C’ option checked can connect
to the router. The drop-down menu will allow you to choose
whether all other MAC addresses that are not in the list will be
blocked or allowed to connect.
When this option is selected, only PCs and devices with MAC
addresses listed below with the ‘A’ option checked can associate
themselves with the wireless LAN. The drop-down menu will
allow you to choose whether all other MAC addresses that are
not in the list will be blocked or allowed to associate.
Enter the MAC addresses you would like to lter and then select
whether you want them in the ‘C’ (Connection Control) group,
the ‘A’ (Association Control) group, or both. If the control groups
are not enabled, these designations will be ignored.
MAC Address
Control:
Connection
Control:
Association
Control:
MAC Address:
Use Media Access Control (MAC) Filter to control access to your network based on the MAC addresses of connected clients. You
can set MAC address ltering to only allow the listed MAC addresses to connect or block access to all listed MAC addresses.
After making your changes, click the Save Settings button.