User manual

48D-Link DIR-506L User Manual
Section 3 - Conguration
Enter a name for the rule or select an application from
the drop-down menu and click << to automatically ll
in the rule with the default settings for that application.
This is the port used to trigger the application. It can be
either a single port or a range of ports.
Enter the ports you want to allow incoming trac when
the trigger port is activated.
Check to enable this rule or leave unchecked to ignore it.
Popular
Applications:
Trigger:
Incoming Ports:
Enable:
Application Rules
Some applications may require multiple connections, such as Internet gaming, video conferencing and VoIP calls over the
Internet. These applications may have diculty working through Network Address Translation (NAT). Application Rules allows
some of these applications to work with the DIR-506L. If you need to run applications that require multiple connections, specify
the port normally associated with the application in the Trigger Port setting and the ports associated with the trigger port to
open them for inbound trac. After making your changes, click the Save Settings button. Note this option is only available
in Router mode.