User manual

13D-Link DIR-506L User Manual
Section 2 - Installation
First Time Setup
3. By default the DIR-506L is in Router mode and must be connected
wirelessly with a computer or mobile device to set up.
4. Using a wireless computer or mobile device, launch your wireless
utility and connect to the DIR-506L. The default Wi-Fi Network
Name (SSID) is dlink_DIR-506L and the Wi-Fi Password is left blank
(no security).
1. Make sure the battery is installed properly (see page 7). Connect the USB cable to the DIR-506L and then connect to a USB
port on your computer. It is strongly recommended to charge the battery at least four hours before using.
LAN
ON
OFF
5V
LAN
ON
OFF
5V
+
-
SharePort
2. Push the power button to the on position and wait until the power
LED turns green.
Installation