User manual
60D-Link DIR-506L User Manual 60D-Link DIR-506L User Manual
Section 4 - Tools
Save Settings
To Local Hard
Drive:
Load Settings
From Local Hard
Drive:
Restore to
Factory Default
Settings:
Clicking the Save button will allow you to save the current
repeater conguration settings to a le on the hard disk
of the computer you are using. You will then see a le
dialog where you can select a location and le name for
the settings.
Use this option to load previously saved conguration
settings. Click Browse to find a previously saved
conguration le. Then, click the Upload Settings button
to transfer those settings to the DIR-506L.
This option will restore all conguration settings back to
the factory default settings. Any settings that have not
been saved will be lost, including any rules that you have
created. If you want to save your current conguration
settings, use the Save button above.
Note: Restoring the factory default settings will not reset
the Wi-Fi Protected Status to Not Congured.
System Settings
This page allows you to save and restore your conguration, reset and reboot the DIR-506L, and remove any added language
packs.