User manual

57D-Link DIR-506L User Manual 57D-Link DIR-506L User Manual
Section 4 - Tools
Time Zone:
Enable Daylight
Saving:
Auto Sync:
NTP Server
Used:
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, click the Enable
Daylight Saving check box. Next use the drop-down
menu to select a Daylight Saving Oset and then enter
a start date and an end date for daylight saving time.
NTP is short for Network Time Protocol. NTP synchronizes
computer clock times in a network of computers. Check
this box to use a NTP server. This will only connect to a
server on the Internet, not a local server.
Enter the NTP server or select one from the drop-down
menu.
Time and Date
The Time page allows you to congure, update, and maintain the correct time on the internal system clock. From this section
you can set the time zone that you are in. Daylight Saving can also be congured to automatically adjust the time when needed.
After making your changes, click the Save Settings button.