User manual
53D-Link DIR-506L User Manual
Section 3 - Conguration
Guest Zone
Tick this checkbox to enable the Guest Zone feature.
Select when the Guest Zone will be active. The schedule
may be set to Always, which will allow the Guest Zone to
be on at all times. You can select a schedule you created,
or you can click the Add New Schedule button to create
a schedule.
Enter a wireless network name (SSID) for your guest zone.
It should be dierent than the network name of your main
wireless network.
Check to allow network connectivity between the Guest
Zone and your main network.
Here, you can select between None, WEP, WPA-Personal,
and WPA-Enterprise. Refer to ”Wireless Settings” on
page 33 for information on how to congure the dierent
security modes.
Enable Guest
Zone:
Add New
Schedule:
Wireless
Network Name:
Enable Routing
Between Zones:
Security Mode:
The Guest Zone feature allows you to create a separate wireless network for guests to access the Internet without allowing
them to connect to your own devices. After making your changes, click the Save Settings button.