User manual
47D-Link DIR-506L User Manual
Section 3 - Conguration
MAC Address Filter
Click Enable to allow MAC ltering.
When this option is selected, only PCs and devices with
MAC addresses listed below with the ‘C’ option checked
can connect to the router. The drop-down menu will allow
you to choose whether all other MAC addresses that are
not in the list will be blocked or allowed to connect.
When this option is selected, only PCs and devices with
MAC addresses listed below with the ‘A’ option checked
can associate themselves with the wireless LAN. The drop-
down menu will allow you to choose whether all other
MAC addresses that are not in the list will be blocked or
allowed to associate.
Enter the MAC addresses you would like to lter and
then select whether you want them group with the ‘C’
(Connection Control) group, the ‘A’ (Association Control)
group, or both. If the control groups are not enabled,
these designations will be ignored.
MAC Address
Control:
Connection
Control:
Association
Control:
MAC Address:
Use MAC (Media Access Control) Filters to control access to your network based on the MAC addresses of connected clients.
You can set MAC address ltering to only allow the listed MAC addresses to connect, or block access to all listed MAC addresses.
After making your changes, click the Save Settings button.