User manual

28D-Link DIR-506L User Manual
Section 3 - Conguration
Select Static if your ISP assigned you an IP address, subnet
mask, gateway, and DNS server address. In most cases,
select Dynamic.
Enter the IP address (Static PPTP only).
Enter the primary and secondary DNS server addresses
(for static PPTP only).
Enter the gateway IP address provided by your ISP.
Enter the server IP provided by your ISP (optional).
Enter your PPTP username.
Enter your PPTP password and then retype the password
in the next box.
Select either Always-on, On-Demand, or Manual.
Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
feature, set the Reconnect Mode to Always on.
The DNS server information will be supplied by your ISP
(Internet Service Provider.)
If you experience connection issues, you may need to
change the MTU setting for optimal performance with
your specic ISP. 1492 is the default MTU.
If you selected PPTP, you will see the following settings. Your ISP will provide you with a username and password. This option
is typically used for DSL services.
Address Mode:
PPTP IP Address:
PPTP Subnet
Mask:
PPTP Gateway
IP Address:
PPTP Server IP
Address:
Username:
Password:
Reconnect
Mode:
Maximum Idle
Time:
Primary/
Secondary DNS
Server:
MTU: