Operation Manual

55D-Link DIR-506L User Manual
Section 3 - Conguration
Guest Zone
Click this box to enable the Guest Zone feature.
Select when the Guest Zone will be active. The schedule
may be set to Always, which will allow the Guest Zone to
be on at all times. You can select a schedule you created
or you can click the Add New Schedule button to create
a schedule.
Enter a wireless network name (SSID) for your guest zone.
It should be dierent than the network name of your main
wireless network.
Check to allow network connectivity between the Guest
Zone and your main network.
Select between None, WEP, WPA-Personal, and WPA-
Enterprise. Refer to Wireless Settings on page 33 for
information on how to congure the dierent security
modes.
Enable Guest Zone:
Add New Schedule:
Wireless Network
Name:
Enable Routing
Between Zones:
Security Mode:
The Guest Zone feature allows you to create a separate wireless network for guests to access the Internet without allowing
them to connect to your own devices. After making your changes, click the Save Settings button. Note this option is only
available in Router mode.