User manual

91D-Link DIR-505L User Manual
Section 3 - Conguration
System
Use this option to save the current router conguration settings
to a le on the hard disk of the computer you are using. First,
click the Save button. A le dialog will appear, allowing you to
select a location and le name for the settings.
Use this option to load previously saved router conguration
settings. First, use the Browse option to nd a previously saved
le of conguration settings. Then, click the Upload Settings
button below to transfer those settings to the router.
This option will restore all conguration settings back to the
settings that were in eect at the time the router was shipped
from the factory. Any settings that have not been saved will
be lost, including any rules that you have created. If you want
to save the current router conguration settings, use the Save
button above.
Click to reboot the router.
If you previously installed a language pack and want to revert all
the menus on the router interface back to the default language
settings, click the Clear button.
Save Settings
To Local Hard
Drive:
Load Settings
From Local
Hard Drive:
Restore To
Factory Default
Settings:
Reboot The
Device:
Clear
Language
Pack:
This section allows you to manage the Access Point’s conguration settings, reboot the AP, and restore the AP to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.