User manual

83D-Link DIR-505L User Manual
Section 3 - Conguration
Setup
Wireless Setup
Service Set Identier (SSID) is the name of your wireless network.
Create a name using up to 32 characters. The SSID is case-
sensitive.
Select one of the following:
802.11g Only - Select if all of your wireless clients are 802.11g.
802.11n Only - Select only if all of your wireless clients are
802.11n.
Mixed 802.11n and 802.11g - Select if you are using a mix of
802.11n and 11g wireless clients.
The Auto Channel Scan setting can be selected to allow the
DIR-505L to choose the channel with the least amount of
interference.
Indicates the channel setting for the DIR-505L. By default the
channel is set to 6. The Channel can be changed to t the channel
setting for an existing wireless network or to customize the
wireless network. If you enable Auto Channel Scan, this option
will be greyed out.
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using
both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
40MHz - Select if using only 802.11n wireless clients.
Select Invisible if you do not want the SSID of your wireless
network to be broadcasted by the DIR-505L. If Invisible is
selected, the SSID of the DIR-505L will not be seen by Site Survey
utilities so your wireless clients will have to know the SSID of
your DIR-505L.
Enable Auto
Channel Scan:
Wireless Network
Name:
Wireless
Channel:
Channel Width:
Visibility
Status:
Wireless Mode: