User manual
46D-Link DIR-505L User Manual
Section 4 - Security
Manual Conguration
Wireless Settings
Router Mode
Wireless
Network Name:
802.11 Mode:
Enable Auto
Channel Scan:
Wireless
Channel:
When you are browsing for available wireless networks, this
is the name that will appear in the list (unless Visibility Status
is set to Invisible, see below). This name is also referred to as
the SSID. For security purposes, it is highly recommended to
change from the default network name.
Select one of the following:
802.11b Only - Select if you are only using 802.11b wireless
clients.
802.11g Only - Select if you are only using 802.11g wireless
clients.
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11g and 802.11b - Select if you are using a mix
of 802.11g and 11b wireless clients.
Mixed 802.11n and 802.11g - Select if you are using a mix
of 802.11n and 11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
The Auto Channel Scan setting can be selected to allow the DIR-505L to choose the channel with the least amount of
interference.
Indicates the channel setting for the DIR-505L. The channel can be changed to t the channel setting for an existing wireless
network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.