User manual
128D-Link DIR-505L User Manual
Section 3 - Conguration
Manual Wireless Settings
Local Wi-Fi
Network Name:
Channel Width:
Security Mode:
WPA Mode:
Cipher Type:
Pre-Shared Key:
Wi-Fi Protected
Setup:
Process WPS:
Select Same as Wi-Fi HotSpot Network Name or Create
Extended SSID.
20MHz- Select if you are not using any 802.11n wireless
clients.
40MHz - Select if you are using 802.11n wireless clients
only.
Select from the drop-down menu the type of security
mode you would like to use.
Select Auto, WPA2 Only, or WPA Only. Use Auto if you
have wireless clients using both WPA and WPA2.
Select TKIP and AES, TKIP or AES.
Enter a key (passphrase). The key is entered as a passphrase
in ASCII format at both ends of the wireless connection.
The pass-phrase must be between 8-63 characters.
Select to enable this feature.
Please refer to page 141.