User manual
108D-Link DIR-505L User Manual
Section 3 - Conguration
Device Name:
LAN Connection
Type:
IP Address:
Subnet Mask:
Default Gateway:
Enter the Device Name of the AP. It recommended to
change the Device Name if there is more than one D-Link
device within the subnet. You can enter the device name
of the AP into your web browser to access the instead of
IP address for conguration. If you are using the device
name to connect, ensure that your PC and your DIR-505L
are on the same network.
Select the connector you are using from the drop-down
menu.
Enter the IP address of the access point. The default IP
address is 192.168.0.50. If you change the IP address,
once you click Apply, you will need to enter the new IP
address in your browser to get back into the conguration
utility.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
This page will allow you to congure the internal network settings of your Repeater.
LAN Setup