User manual

107D-Link DIR-505L User Manual
Section 3 - Conguration
Extended Wi-Fi Setup
This page allows you to congure the wireless LAN settings for your router by giving you the opportunity to create a new
Wi-Fi Network Name for your local Wi-Fi network or use the same Network Name as the joined Wi-Fi HotSpot for your local
Wi-Fi Network.
Wi-Fi Network
Name:
Extended Wi-Fi
Network Name
(SSID):
Channel Width:
Visibility Status:
Wi-Fi Protected
Setup:
Displays the devices name.
This gives you the option to select the same Wi-Fi Network
Name or to Create a new Wi-Fi Network Name for your local
Wi-Fi network.
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using
both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless
clients.
40MHz - Select if using only 802.11n wireless clients.
Select Invisible if you do not want the SSID of your wireless
network to be broadcasted by the DIR-505L. If Invisible is
selected, the SSID of the DIR-505L will not be seen by Site
Survey utilities so your wireless clients will have to know the
SSID of your DIR-505L.
Click Enable to activate the Wi-Fi Protected Setup (WPS)
feature.