Owner's manual

47D-Link DIR-455 User Manual

Section 3 - Conﬁguration

INTBOUND FILTER SETTING

Select this box to Enable the lter.

You may select Always On or

choose the number of a schedule

rule that you have dened.

Copies the predened lter to the

specied ID

INBOUND FILTER RULES LIST

Identies the lter.

Specify the local IP address and then

specify the port after the colon.

Specify the remote IP address and

then the port after the colon.

Select this box to enable the lter.

Specify the schedule rule number.

Go back to the previous lter page.

Advance to the next lter page.

Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.

Inbound Filter

Inbound Filter:

Use Schedule Rule:

Copy to ID:

ID:

Source IP : Ports:

Destination IP : Ports:

Enable:

Schedule Rule #:

Inbound Filter enables you to control what packets are allowed to pass the router. Inbound lter only applies to packets that are destined

for Virtual Servers or DMZ hosts.