Systems Network Router User Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration
- Web-based Configuration Utility
- Internet Connection Setup Wizard (3G Mode)
- Manual Configuration (3G Mode)
- Internet Connection Setup Wizard (WAN Mode)
- Manual Configuration (WAN Mode)
- Wireless Settings
- Network Settings
- Virtual Server
- Port Forwarding
- Application Rules
- QoS Engine
- Network Filters
- Website Filters
- Firewall Settings
- Advanced Wireless Settings
- Wi-Fi Protected Setup
- Advanced Network Settings
- Administrator Settings
- Time Settings
- E-mail Settings
- System Settings
- Update Firmware
- DDNS
- System Check
- Schedules
- Device Information
- Logs
- Statistics
- Internet Sessions
- Wireless
- Support
- Web-based Configuration Utility
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
- Contacting Technical Support
- Warranty
- Registration

23D-Link DIR-412 User Manual
Section 3 - Conguration
If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select your
Internet type and enter the correct conguration parameters.
Manual Conguration (WAN Mode)
Select your Internet connection type using the
“My Internet Connection is:” drop-down menu.
To enable the Router to connect to the Internet
via the 3G Internet connection in the event that
the WAN connection fails, check the Enable WAN
Failover box. Congure the parameters for your
WAN connection in the section below the Internet
Connection Type section as described in the
following pages.
If enabling the WAN Failover feature, congure
the parameters for your 3G Internet Connection.
Internet Connection Type:
3G Internet Connection:
Click the Save Settings button when you have nished
conguring the WAN connection.










