Systems Network Router User Manual
Table Of Contents
- Preface
- Product Overview
- Installation
- Configuration
- Web-based Configuration Utility
- Internet Connection Setup Wizard (3G Mode)
- Manual Configuration (3G Mode)
- Internet Connection Setup Wizard (WAN Mode)
- Manual Configuration (WAN Mode)
- Wireless Settings
- Network Settings
- Virtual Server
- Port Forwarding
- Application Rules
- QoS Engine
- Network Filters
- Website Filters
- Firewall Settings
- Advanced Wireless Settings
- Wi-Fi Protected Setup
- Advanced Network Settings
- Administrator Settings
- Time Settings
- E-mail Settings
- System Settings
- Update Firmware
- DDNS
- System Check
- Schedules
- Device Information
- Logs
- Statistics
- Internet Sessions
- Wireless
- Support
- Web-based Configuration Utility
- Wireless Security
- Connect to a Wireless Network
- Troubleshooting
- Wireless Basics
- Networking Basics
- Technical Specifications
- Contacting Technical Support
- Warranty
- Registration
18D-Link DIR-412 User Manual
Section 3 - Conguration
Select the type of Internet connection you will use on your
WAN connection. If using the DIR-412 for the rst time, leave
the Skip3GConguration box unchecked. Check the Skip
3GConguration box if you do not want to congure the
router’s 3G connection.
Click Next to continue.
If you selected Dynamic IP Address, you may need to enter
the MAC address of the computer that was last connected
directly to your modem. If you are currently using that
computer, click Copy Your PC’s MAC Address and then
click Next to continue.
The Host Name is optional but may be required by some
ISPs. The default host name is DIR-412.