Specifications

Application Note #231 – Using a VPN Connection to Remotely Access Lutron® Systems

Lutron® Technical Support Center

1.800.523.9466

1. Set the Router IP Address to 192.168.100.1

2. Ensure the Default Subnet Mask is 255.255.255.0

3. Ensure the Local Domain Name is blank.

4. Ensure the Enable DNS Relay is checked.

5. Press the Save Settings button at the top.

iii. Restart the computer that is connected to the router in order for it to acquire its new IP address.

Then re-open a web browser and enter the new IP address of the VPN router (192.168.100.1).

Figure 2

b. Configure the VPN router’s Internet connection settings:

i. If the ISP provides a static IP address the VPN router must be configured with a static Internet IP

address:

1. Access the VPN Router’s internal configuration pages at its address: 192.168.100.1

2. Select the Setup tab.

3. Click Internet from the left menu.

4. Under Manual Internet Connection Options, select the Manual Configure button.

5. Change My Internet Connection is to Static IP.

6. Fill in the IP Address, Subnet Mask, ISP Default Gateway Address, MAC Address,

and DNS Servers your ISP has provided.