Specifications

Application Note #231 – Using a VPN Connection to Remotely Access Lutron® Systems
Lutron® Technical Support Center
1.800.523.9466
20
Figure 21
  
7. Enter the appropriate information, based on how you configured the VPN router.
a. Description is a user-friendly, arbitrary name given to the VPN connection.
b. Server will be the IP address or Dynamic DNS name to access the router from the Internet.
c. Account is the user name set up for the PPTP server on the VPN router
d. RSA SecurID should remain set to OFF.
e. Password is the password set up for the account/user name used to access VPN router (created in “Configuring
the Router”, step 3.c.iii.).
f. Encryption Level should remain set to Auto.
g. Send All Traffic should remain set to ON.
8. Save the VPN configuration.
9. Slide the “VPN” switch to the ON position (this establishes the connection with the VPN, if available). Once
connected, there will be an icon at the top of the screen indicating the VPN session is active.