Specifications

Application Note #231 – Using a VPN Connection to Remotely Access Lutron® Systems
Lutron® Technical Support Center
1.800.523.9466
2
router environment incompatible with Lutron® systems. See “Appendix C – Technical Specifications” subsection
“Default Factory Settings” of the router’s product manual for instructions on performing a reset.
3. Ensure each HomeWorks® IlluminationTM/QS Processor or the RadioRA® 2 Main Repeater is using a static IP address
and you have those addresses readily available. Static IP addresses are required to ensure devices using the VPN
remotely can locate the system.
4. Confirm the PC you will be using to configure the VPN Router is set to obtain an IP address dynamically. Please
reference the following Microsoft Windows
® articles for support:
a. Windows XP
®: http://support.microsoft.com/kb/305553
b. Windows Vista
®: http://windows.microsoft.com/en-US/windows-vista/Change-TCP-IP-settings
c. Windows
® 7: http://windows.microsoft.com/en-US/windows7/Change-TCP-IP-settings