Specifications

Application Note #231 – Using a VPN Connection to Remotely Access Lutron® Systems

Lutron® Technical Support Center

1.800.523.9466

8. On the VPN Server Selection screen type in the static IP address of your client’s network or the DynDNS host name

then click Next >.

Figure 12

9. If the Connection Availability screen appears (some PC configurations skip this screen) select the desired

availability then click Next >.

10. Click Finish to complete the setup.

11. After finishing the Connection Wizard, you will be prompted to enter the User name and Password. This is the

same username and password that you created in step 3.c.iii above under Configuring the Router. You will also

notice that in the Network Connections box a new connection has been created. Use this connection next time you

need to connect to this VPN router.