Specifications

92D-Link DIR-330 User Manual
Appendix C - Technical Specifications
Default Factory Settings
When you receive your router, the default factory settings are in effect as listed in the table below. You may change any
of the network and wireless settings. If you perform a reset (hold the reset button on the back of the unit), the router
will reset with the following settings:
Setting Default Value
Username admin
Password (leave blank)
LAN IP Address 192.168.0.1
DHCP Server Enabled
DHCP IP Range 192.168.0.100 - 192.168.0.150
Filtering / Virtual Server / DMZ / Applications Disabled
Wireless Broadcast Enabled
SSID dlink
WEP / WPA / WPA2 Disabled
Wireless Channel 6