Specifications

70D-Link DIR-330 User Manual

Section 4 - Security

It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish

wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to

the added overhead.

1. Log into the web-based conﬁguration by opening a web browser

and entering the IP address of the router (192.168.0.1). Click on

Setup and then click Wireless Settings on the left side.

2. Click the Manual Wireless Connection Setup button.

3. Next to Security Mode, select Enable WPA, Enable WPA2, or

Enable WPA/WPA2.

4. Next to PSK/EAP, select EAP.

5. Next to RADIUS Server IP Address enter the IP Address of your

RADIUS server.

6. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port.

7. Next to RADIUS Server Shared Secret, enter the security key.

8. Click Save Settings to save your settings.

Conﬁgure WPA/WPA2-EAP (RADIUS)