Specifications

69D-Link DIR-330 User Manual

Section 4 - Security

Conﬁgure WPA/WPA2-PSK

It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish

wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to

the added overhead. The conﬁguration of WPA, WPA2, and WPA/WPA2 uses the same options.

1. Log into the web-based configuration by opening a

web browser and entering the IP address of the router

(192.168.0.1). Click on Setup and then click Wireless

Settings on the left side.

2. Click the Manual Wireless Connection Setup button.

3. Next to Security Mode, select Enable WPA, Enable WPA2,

or Enable WPA/WPA2.

4. Next to PSK/EAP, select PSK.

5. Next to Network Key, enter a passphrase.. The passphrase

must be between 8-63 characters. This passphrase must be entered on your wireless clients to connect.

6. Click Save Settings to save your settings. If you are conﬁguring the router with a wireless adapter, you will lose

connectivity until you enable encryption on your adapter and enter the same passphrase as you did on the router.