User manual

DIR-320NRU Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Creating PPTP + Dynamic IP or L2TP + Dynamic IP WAN Connection
To create a connection of the PPTP + Dynamic IP or L2TP + Dynamic IP type, click the Add button
on the Net / WAN page. On the opened page, select the relevant value from the Connection
Type drop-down list and specify the needed values.
Figure 76. The page for creating a new connection. The General settings and Ethernet sections.
Parameter Description
General settings
Provider Leave the Manually value.
Port
A physical or virtual interface to which the new connection will be
assigned.
Select the USB-WIMAX value to assign this connection to the
WiMAX USB modem.
Name
A name for connection for easier identification.
Enable
Select the checkbox to enable the connection.
Direction
The direction of this connection.
Ethernet
MTU
The maximum size of units transmitted by the interface.
Page 92 of 156