User manual

DIR-320NRU Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the RADIUS settings and
WPA Encryption settings sections are available:
Figure 58. The WPA2 value is selected from the Network Authentication drop-down list.
Parameter Description
WPA2 Pre-
authentication
The checkbox activating preliminary authentication (displayed only
for the WPA2 and WPA/WPA2 mixed authentication types.
IP address The IP address of the RADIUS server.
Port
A port of the RADIUS server.
RADIUS encryption key
The password which the router uses for communication with the
RADIUS server (the value of this parameter is specified in the
RADIUS server settings).
WPA Encryption
An encryption method: TKIP (available only for the WPA
authentication type), AES (available only for the WPA2 and
WPA/WPA2 mixed authentication types).
WPA renewal
The time period (in seconds), at the end of which a new key for WPA
encryption is generated. When the value 0 is specified for this field,
the key is not renewed.
Click the Next button to continue.
When all the steps of configuring the WLAN are completed, the specified settings are displayed on
the page. Check their correctness and then click the Save button. After that you get to the quick
settings page.
Page 67 of 156