User manual

DIR-320NRU Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
PPTP + Static IP or L2TP + Static IP Connection
Figure 37. Configuring PPTP + Static IP WAN connection.
In the Name field, specify a name for the connection for easier identification and click the Next
button.
Figure 38. Configuring PPTP + Static IP WAN connection.
If needed, in the MTU field, change the maximum size of units transmitted by the interface.
If your ISP uses MAC address binding, in the MAC field, enter the MAC address registered by your
ISP upon concluding the agreement.
You can click the Clone MAC button to set the MAC address of the network interface card (of the
computer that is being used to configure the router at the moment).
Page 47 of 156