User manual

DIR-320NRU Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Actions of the Save, Factory, and Backup buttons also can be performed via the top-page menu
displayed when the mouse pointer is over the System caption.
System Log
On the System / System log page, you can set the system log options and configure sending the
system log to a remote host.
Figure 73. The System / System log page. The Configuration tab.
To enable logging of the system events, select the Logging checkbox on the Configuration tab.
Then specify the needed parameters.
Control Description
Logging type
Select a type of logging from the drop-down list.
• Local: the system log is stored in the router's memory (and
displayed on the Log tab). When this value is selected, the
Server address type, Server, and Port fields are not
displayed.
• Remote: the system log is sent to the remote host specified
in the Server field.
• Local and remote: the system log is stored in the router's
memory (and displayed on the Log tab) and sent to the
remote host specified in the Server field.
Logging level Select a type of messages and alerts/notifications to be logged.
Page 99 of 108